Operating; Language Selection; Measurement Procedure; Special Functions - Chauvin Arnoux C.A 1244 Notice De Fonctionnement

English
2.1

LANGUAGE SELECTION

When the device is off, keep the SELECT button pressed and then press the ON /
OFF button.
Press SELECT to choose English or French, press OK to validate.
2.2

MEASUREMENT PROCEDURE

1. Activate the device by pressing the ON / OFF button.
2. Select the unit of measurement for temperature.
3. Wait a few seconds to stabilize measurements.
4. Freeze the display if necessary with the HOLD button.
3.1

CHOOSING THE MEASUREMENT UNITS

Press SELECT to enter the menu.
Press OK to enter.
Scroll down the temperature measurement untis by pressing SELECT.
Press OK to validate your choice.
3.2 FREEZING THE MEASUREMENT, MINIMUM AND MAXIMUM
VALUES
To freeze the measurement on the screen, press HOLD / MIN / MAX.
For parameter 1, press HOLD / MIN / MAX two time to display the values min and
max.
Press third time to display the values for parameter 2.
To escape this function, press ON / OFF / ESC.
3.3

SELECTING DISPLAY SETTINGS

To display the dew point temperature with the ambient temperature, press OK
once.
Press twice to display dew point temperature and hygrometry.
Press 3 times to come back to display ambient temperature and hygrometry.
12

2 OPERATING

3 SPECIAL FUNCTIONS

C.A 1244