16
Settings (by a professional)
5.11 Seat width (wheelchair
specific)
The distance between the seat shells edges
(T) and the required seat width relate as
(T) = (U) + 12 cm.
Rough adjustment
When mounting the seat, choose the screw
hole pattern that fits the required seat width
range: 30 to 40 cm, 40 to 50 cm or over 50 cm.
Finetuning
Further adjustment of the seat width for a
specific user takes place during a fitting
session.
1. Remove the straps on one side by detaching
the velcro ends from the velcro surfaces on
the seat shells.
2. Loosen (V) on both sides.
3. Move the armrest holder (W) inwards or
outwards on both sides.
4. Fasten (V) on both sides.
5. Tension the straps and attach the velcro
ends to the velcro surfaces of the seat
shells.
5.12 Seat depth (wheelchair
specific)
1. Loosen (X) on both sides.
2. Slide (Y) to the front or back to create the
required seat depth.
3. Fasten (X) on both sides.
U
T
1
3
W
2
Y
Nuage
21
22
V
23
1
X
3
2