Pelvic Obliquity (Ii) - Breezy NUAGE PL Notice D'utilisation

Nuage
S
# Middle 1
segments
Seat width 30-40 cm
2. Attach the velcro strap to the bottom side of
the cushion segments to hold them together.
3. Loop a webbing strap (B) through slotted
holes (H) and attach on the outside of the
seat shells with velcro.
4. Place the contour cushion on the seat, back
side of the cushion against (B).
5. Loop a webbing strap (B) over the top of the
cushion and through slotted holes (I). Attach
the strap on the outside of the seat shells
with velcro.
6. Place a webbing strap (B) against the front
of the contour cushion and attach directly on
the outside of the seat shells with velcro.
Caution!
Do not put much tension on the straps (B)
that hold the contour cushion in place.

5.5 Pelvic obliquity (II)

1. Create an asymmetrical support by choosing
different slottted holes (F1 to F5) left and
right.
2. Tension the webbing straps (B) in slotted
holes (F1 to F5) or if required over edge (G).
M L
2 3
40-50 cm > 50 cm
Settings (by a professional)
I
B
H
3
4
H
3
I
5
6
C
B
6
B
2
F1- F5
13
12
I
13
B
I
5
14
G
F1- F5
1