Seat Webbing; Pelvic Obliquity; Leg Length Discrepancy - Breezy NUAGE PLS Série Notice D'utilisation

12 Settings (by a professional)

5.1 Seat webbing

The four simple straps in the front and the four
ad ustable straps in the back enable to follow
the contours of buttocks and upper legs while in
the mean time providing support where needed
for an optimal seating position and stability.
1. Place the adjustable straps in recesses (F),
(G) and / or if required over the edge (H).
2. Tension adjustable straps and fasten the
velcro ends.
3. Tension further with the sliding buckles.
4. lace the simple straps in recess (I).
5. Tension and fasten the velcro ends.
Warning!
Tension the seat straps sufficiently to prevent
bottoming-out.

5.2 Pelvic obliquity

1. Tension the adjustable straps in recesses (F)
and (G) or if required in recess (G) and over
edge (H).
2. se the sliding buckles and move the velcro
ends to create a different (asymmetrical)
support left and right.

5.3 Leg length discrepancy

1. Move one of the seat shells forwards. To do
so, loosen the armrestholder, slide it in the
rail towards the front of the seat and fasten
again.
2. Tension an adjustable strap from recess (G)
to recess (I). t (I) remove the sliding buckle.
Note!
Step 1 is not possible in combination with
seating systems other than Sedeo Pro /
Sedeo Original.
F
I
G
2
F
2
I G
1
Nuage
8
H
G
9
H
1
10