Installing The Handle Bar; Install/Empty Grass Catchment Basket - Grizzly BRM 46-140 BSA Q-360 InStart Traduction De La Notice D'utilisation Originale

All manuals and user guides at all-guides.com

Installing the Handle Bar

Caution! Make sure that the
Bowden cables (
machine cable (
squeezed when the grip is in-
stalled.
Mounting the lower
handlebar:
1. Remove the two star grip
screws (22) from the machine
housing (19).
2. Attach the two ends of the lower
handlebar (5) to the machine
housing (19).
3. Fasten the lower bar (5) to the
machine housing (19) using the
two star grip screws (22).
Mounting the upper grip:
4. Screw the upper handlebar (1)
to the right and left of the lower
bar (5) using the included quick-
release levers and nuts (4).
5. Unfold upper handlebar (1)
(small picture) and push locking
lever (4) toward bar.
6. Attach the two Bowden cables
(7) to the lower handlebar (5)
using the cable clamp (6).
Installing
the tray:
7. Place the tray (32) onto the lower hand-
lebar (1).
8. Fasten the tray (32) using the 4 Phillips
screws (33) in the holes on the upper
handlebar (1).
9. Connect the plug-in connector of the
7) and the
27) are not
10. Fasten the machine cable (
Install/empty grass catchment
basket
Connecting the
machine cables:
e-start (40) to the plug-in connector of
the rechargeable battery (41). See illus-
tration .
the lower handlebar (5) using the ca-
ble clamp ( 24).
Caution: Do not operate the
equipment with the grass col-
lection box or impact protection
installed incompletely. Risk of
injury!
Assemble grass catchment
basket:
1. Place the plastic tabs (34) over
the collection box.
2. Place the collection box handle
(26) on the collection box (23).
3. Fasten the collection box handle
(26) using the screws (26a).
Fixing the Grass Collection
Box onto the Equipment:
Prior to using the collection box,
the mulch kit and lateral ejection
canal must be removed. (see
).
1. Lift up shock protection (18).
2. Hook the grass collection box
(23) into the mounting provided
for this (35) on the rear of the
equipment. .
3. Release the impact protection
(18). It holds the grass collec-
tion box in position.
GB
27) to
,
101