Sissel Hang UP PRO Manuel D'utilisation page 34

Step 6
Attach the other Handlebar (29) onto Rear Frame (3) with two Washers (13), one Curve Washer (14),
one Lock Nut (15), one Bolt (38), one Bolt (46) and one Spring Washer (63). Tighten Bolt (46) with #6
Allen Wrench provided. Tighten Bolt (38) and Lock Nut (15) with #6 Allen Wrench and Multi Hex Tool
with Phillips Screwdriver provided.
Attach the Cap (82) to the Lock Nut (15).
Hardware:
(13) Washer (14) Curve Washer (38) Bolt
(15) Lock Nut
2 PCS 1 PC 1 PC
(Galvanize)
1 PC
(46) Bolt
(63) Spring Washer (82) Cap
1 PC
1 PC
1 PC
AH 07 V4 34 / 108