Sissel Hang UP PRO Manuel D'utilisation page 29

STORAGE
Pull out the Pin (76), and then fold the Front Frame (1) and the Rear Frame (3).
When the inversion table is displayed in a store, or when it is not in use, it should be locked with the
Tube Clamp (87) to prevent unsupervised use. Use a Phillips screwdriver to undo the screw on Tube
Clamp (87) to unlock the Tube Clamp (87). Then use the Tube Clamp (87) to connect both Adjustable
Boom (8) and front bar of the Front Frame (1) together as shown in illustration above. To prevent removal
please tighten the screw.
ASSEMBLY INSTRUCTIONS
AH 07 V4
Tool:
Multi Hex Tool with
Phillips Screwdriver
29 / 108