Sissel Hang UP PRO Manuel D'utilisation page 27

WARNING:
To avoid serious injury, feet must be secured before inverting. Do not use the table if the ankle
lock system does not function properly.
TROUBLESHOOTING SECTION
OPERATION
THE HANDLEBARS
For added convenience and safety, a set of Handlebars has been added to the inversion table. These
Handlebars are located at the top of the Rear Frames. The Handlebars are there to help you return to
the upright position from any degree of inversion. If you wish to return to the upright position, and the
bed is moving too slowly, or not moving at all, simply grab the Handlebars and pull on them until you
return to the upright position. Always hold on to the handlebars and go back slowly. Failure to comply
could result in serious physical injury.
NOTE:
The inversion table should always return to the upright position when you move your hands below your
waist. If it does not, the inversion table is probably not adjusted correctly to your height.
AH 07 V4
In case the Adjustable Handle is too tight to
release Rubber Heel Holder, please follow these
steps:
1. Pull the Adjustable Handle.
2. Press the Button.
3. Push the Adjustable Handle forward.
27 / 108