Sissel Hang UP PRO Manuel D'utilisation page 30

Step 1
Lay the base on its side as shown. Attach the Front Foot Caps (53) to the Front Frame (1) each with
one Washer (27) and one Bolt (51). Attach the Rear Foot Caps (49) to the Rear Frame (3) each with
one Washer (27) and one Bolt (51).
Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Front Foot Cap is marked with F.
Rear Foot Cap is marked with R.
NOTE: The product weights more than 20 kgs/44 lbs and should be assembled and moved by
two or more people.
Hardware:
(27) Washer (51) Bolt
4 PCS 4 PCS
AH 07 V4 30 / 108