Medela Pump In Style Advanced Mode D'emploi page 15

8
• Soak in warm soapy water for
5 minutes.
• Clean with a clean dish-cloth or
soft brush
• Rinse parts with clear water.
• Allow to air dry in a clean area.
11
Align connection points and hold
back of pump with one hand while
pushing on the faceplate until it
snaps into place.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
9
• Some breastpump models may have a
diaphragm that appears different than
pictured above.
• Carefully wipe the entire surface area of the
diaphragm where particles or liquid may
have accumulated, including the cap in the
center, if present, with a clean (no soap),
damp cloth.
• Allow all parts including edges to air dry,
completely, in a clean area before replacing
the faceplate.
15