Medela Pump In Style Advanced Mode D'emploi page 18

2. Assembly (cont.)
Warning
• Use only the power adaptor supplied
with the Pump In Style Advanced Double
Breastpump.
• Always inspect the 9 volt power adaptor
and Battery Pack (sold separately) cords
prior to use for damaged, kinked, twisted,
frayed or exposed wires. If damaged,
immediately discontinue use and call
Medela Customer Service at
1-800-435-8316.
Note
• See Section 2.3.2 Traveling Outside
the U.S. for information on using your
device internationally.
18
2.1 Assembly of pump kit
(cont.)
7
87071 8107264
Insert hard yellow adapter ends
of tubing into hole on the back
of breashield connectors.
10
Plug the metal fi tting on end of
9 volt power adaptor or Battery
Pack cord into the power jack on
front of breastpump faceplate.