JVC XV-FA900BK Manuel D'instructions page 78

Additional information
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
POWER
Symptom
Power does not come on.
OPERATION
Symptom
The remote control unit does not work.
The TV/VIDEO - CANCEL, 5/∞/2/3 or
numeric buttons do not work.
Operation is not possible.
The disc tray carousel does not move.
When using the TITLE/GROUP button to
select a title during DVD VIDEO playback,
appears on the TV screen and the title
cannot be selected.
76
Possible cause
Power plug is not inserted securely.
Possible cause
Too far from the unit.
The tip of the remote control unit is not
pointed in the right direction.
Batteries are exhausted.
Battery polarity is incorrect.
The remote control unit is not set for
operating your TV.
The TV - DVD switch is not correctly set.
Microcomputer malfunction due to
lightning or static electricity.
Moisture condensation caused by a sudden
change of temperature or humidity.
The disc does not allow the operation.
Or a non-playable disc is loaded.
The system malfunctions.
An alien substance is jammed on the
carousel.
The disc does not allow the operation
because of disc contents.
Remedy
Plug in securely.
Remedy
More closer to the unit.
Point the infrared light- emitting window
toward the remote sensor on the front
panel (see page 12).
Replace the batteries with new ones.
Take out the batteries and insert them again
in the correct direction.
Set the remote control unit for operating
your TV (see page 13).
To control the unit, set the TV - DVD switch
" ."
to DVD To control your TV, set the TV -
" "
DVD switch to TV (see page 13).
Turn off the power and unplug the power
cord, then connect the power cord again.
Turn off the power, then turn it on a few
hours later.
Check and replace the disc (see page 4).
Press 7 or turn off the power.
Try to press 7 and select a title using the
numeric buttons on the remote control
unit.