Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Changing the initial settings
Menu items
SCREEN SAVER
You can select the screen saver
function ON or OFF.
See page 19 for details about screen
saver function.
MP3/JPEG
The unit can play back MP3 and
JPEG files recorded on a CD-R/CD-
RW disc, however, if a disc contains
both of MP3 and JPEG files, you can
only play back files of either type
selected by this menu item.
AUDIO page
AUDIO
DIGITAL AUDIO OUTPUT
STREAM/PCM
ANALOG OUT
MULTI CHANNEL
D. RANGE COMPRESSION
AUTO
SELECT
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER
TO EXET, PRESS CHOICE.
Menu items
DIGITAL AUDIO OUTPUT
To connect the unit's digital output to
an external device equipped with a
digital input, this item must be set
correctly.
See the table below for details
about the relation between the
setting and output signals.
Digital output signal chart
Playback discs
DVD with 48/44.1 kHz, 16/20/24
bit linear PCM
DVD with 192/176.4/96/88.2 kHz,
16/22/24 bit linear PCM
DVD with DTS
DVD with Dolby Digital
Audio CD/Video CD/SVCD
Audio CD with DTS
CD-R/RW with MP3
64
Setting options
• ON
The current picture gets dark.
• OFF
The screen saver function is off.
• MP3
MP3 files can be played back if a disc
contains both of MP3 and JPEG files.
• JPEG
JPEG files can be played back if a disc
contains both of MP3 and JPEG files.
This page allows you to select desired options concerning with audio sound.
Setting options
• PCM ONLY
Should be selected when you
connect the DIGITAL OUT jacks of
the unit to the linear PCM digital
input of other audio equipment.
• DOLBY DIGITAL/PCM
Should be selected when you
connect the digital input of a Dolby
Digital decoder or an amplifier with
a built-in Dolby Digital decoder.
When this option is selected,
playing back a disc recorded by the
DTS or MPEG Multichannel format
outputs a linear PCM digital signal.
• STREAM/PCM
Should be selected when you
connect the digital input of an
amplifier with a built-in DTS, MPEG
Multichannel or Dolby Digital
decoder, or the stand-alone unit of
such a decoder.
PCM ONLY
48 kHz, 16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear PCM
44.1 kHz, 16 bit, stereo linear PCM
• The screen saver function does not
work for still images during DVD
AUDIO playback.
• When a disc contains either MP3 or
JPEG files, the unit can play back the
files regardless of the setting.
• When playing a DVD VIDEO or
Audio CD disc with DTS, use a DTS
decoder to get correct signals from
your speakers.
• With some DVD VIDEO discs that are
not fully copy-protected, a 20 or 24
bit digital signal may be output.
Output
DOLBY DIGITAL/PCM
48/44.1 kHz,16 bit, stereo linear PCM
No output
Dolby Digital bitstream
44.1 kHz,16 bit, stereo linear PCM
Linear PCM
Notes/examples
Notes/examples
STREAM/PCM
DTS bitstream
DTS bitstream
Publicité
Table des Matières
