Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Basic operations
7
Press ENTER.
The pull-down menu of the "DIGITAL AUDIO
OUTPUT" appears.
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG OUT
D. RANGE COMPRESSION
SELECT
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER
TO EXET, PRESS CHOICE.
DIGITAL AUDIO OUTPUT selection
8
Use 5/∞ to select a desired digital output
signal type.
You must set this item correctly when you connect
the unit to an external surround decoder or D/A
convertor (including an amplifier/receiver with
built-in surround decoder or D/A convertor).
(If you do not connect the unit to such a device, you
do not have to set this item.)
• When connecting with a Dolby Digital decoder,
select "DOLBY DIGITAL/PCM."
• When connecting with a DTS or MPEG
Multichannel decoder, select "STREAM/PCM."
• When connecting with other digital devices,
select "PCM ONLY."
See page 64 for details.
9
Press ENTER.
The TV screen returns to show the opening display.
NOTES
• This setting may not be necessary except when turning
on the power after purchasing the unit.
• You can also set these items, as well as other
preferences, by pressing CHOICE briefly to bring up the
preference display. See "Changing the initial settings"
on and after page 60 for details.
16
DOLBY DIGITAL/PCM
PCM ONLY
DOLBY PROLOGIC
DOLBY DIGITAL/PCM
STREAM/PCM
ON
Publicité
Table des Matières
