JVC XV-FA900BK Manuel D'instructions page 71

1
Use 5/∞ to move
ENTER.
The DELAY display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 60 for details about how to bring up the
"SPK.SETTING" page.
DELAY
CENTER SPEAKER
REAR SPEAKER
RETURN
SELECT
USE 5∞ TO SELECT, USE ENTER TO CONFIRM
ENTER TO EXET, PRESS CHOICE.
2
Use 5/∞ to select the speaker to be set and
press ENTER.
CENTER SPEAKER: Center speaker
REAR SPEAKER: Rear speakers
3
Use 5/∞ to select the delay time and press
ENTER.
When you select "CENTER SPEAKER," you can
select the delay time from "0.0m/0ft" to "1.5m/5ft"
in 1ft units.
When you select "REAR SPEAKER," you can select
the delay time from "0.0m/0ft" to "4.5m/15ft" in 1ft
units.
4
Repeat steps 2 and 3 if you set other
speakers.
• To return to the "SPK. SETTING" page
Use 5/∞ to move
to [RETURN] and press ENTER.
NOTE
• For the speaker(s) whose size is set to "NONE," the
delay time cannot be set.
To set the speaker level
You can adjust the output level of each speaker.
OPEN/ DISC
CLOSE SELECT
TV1
1
TV4
4
TV7
7
TV-/--
10
RETURN PAGE
CH
+
VOL-
ENTER
ENTER
CH
-
PREVIOUS
CLEAR
SLOW-
REPEAT SUB TITLE
DIGEST ANGLE
3D
PHONIC
RM-SXV016J
REMOTE CONTROL
¶ While the "SPK.SETTING" page of the preference
display is shown
to [DELAY] and press
0.0m/ 0ft
0.0m/ 0ft
TV DVD
STANDBY/ON
TV DVD
TV2 TV3
2 3
TV5 TV6
5 6
TV8 TV9
8 9
TV0 MUTING
0 +10
TITLE/ TV/VIDEO
GROUP CANCEL
5/∞
VOL+
NEXT
SELECT STROBE
SLOW+
AUDIO VFP
fs/Rate PROGRESSIVE
SCAN
ZOOM
AMP VOL
1
Use 5/∞ to move
ENTER.
The LEVEL display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 60 for details about how to bring up the
"SPK.SETTING" page.
LEVEL
FRONT SPEAKER
CENTER SPEAKER
REAR SPEAKER
SUB WOOFER
TEST TONE
RETURN
SELECT
USE 5∞ TO SELECT, USE ENTER TO CONFIRM
ENTER TO EXET, PRESS CHOICE.
2
Use 5/∞ to select the speaker to be set and
press ENTER.
FRONT SPEAKER: Front speakers (This item
cannot be selected. The level is
fixed to 0dB.)
CENTER SPEAKER: Center speaker
REAR SPEAKER: Rear speakers
SUB WOOFER: Subwoofer speaker
3
Use 5/∞ to set the level and press ENTER.
When you select "CENTER SPEAKER," "REAR
SPEAKER" or "SUB WOOFER," you can select the
level from –6 to 6dB in 1dB units.
4
Repeat steps 2 and 3 if you set other
speakers.
• To return to the "SPK.SETTING" page
Use 5/∞ to move
to [RETURN] and press ENTER.
NOTE
• For the speaker(s) whose size is set to "NONE," the
speaker level cannot be set.
To generate test tone signals
You can check the level setting by monitoring the test
tone.
1
Use 5/∞ to select [TEST TONE] and press
ENTER.
2
Use 5/∞ to select [ON] and press ENTER.
The test tone will be generated when you select the
speaker(s) in the "LEVEL"display.
Changing the initial settings
to [LEVEL] and press
0dB
0dB
0dB
0dB
OFF
English
69