Advanced operations
3
To define a user setting, select a parameter to
be edited using 5/∞ from the following.
• GAMMA
Controls the brightness of a shaded portion
without changing the brightness of the entire
picture.
This control is optimum when you adjust the
pictures of software which generates subdued
black in a bright room.
The setting range is +4 to -4.
• BRIGHTNESS
Controls the brightness of the screen.
The setting range is +16 to -16.
• CONTRAST
Controls the contrast of the screen.
The setting range is +16 to -16.
• SATURATION
Controls the color depth of the screen.
The setting range is +16 to -16.
• TINT
Controls the tint of the screen.
Use the appearance of a natural complexion as
the guideline.
The setting range is +16 to -16.
• SHARPNESS
Controls the sharpness of the screen.
The setting range is +3 to 0.
• Y DELAY
Controls the color gap of the screen.
The setting range is +2 to -2.
4
Press ENTER.
A window for setting parameters appears instead
of the VFP mode selection window.
5
Use 5/∞ to adjust the level of the parameter.
The higher value enhances the effect.
6
Press ENTER.
The parameter is set and the VFP mode selection
window appears again.
Repeat steps 3 to 6 if you want to set other
parameters.
NOTES
• The number of setting steps depends on parameters.
• To dismiss the VFP mode selection window:
Press VFP - PROGRESSIVE SCAN.
• The window for VFP mode selection and parameter
setting disappears if no operation is made for about 10
seconds.
• The VFP function cannot be used during JPEG playback.
44
SATURATION
+ 5
+ 4
Selected parameter
To simulate surround sound
[3D PHONIC]
Using the 3D PHONIC function, you can get a simulated
surround effect from your stereo system.
OPEN/
DISC
CLOSE
SELECT
TV1
1
TV4
4
TV7
7
TV-/--
10
RETURN
PAGE
CH
+
VOL-
CH
-
PREVIOUS
CLEAR
SLOW-
REPEAT
SUB TITLE
DIGEST
ANGLE
3D
3D PHONIC
PHONIC
RM-SXV016J
REMOTE CONTROL
¶ During playback
1
Press 3D PHONIC.
The 3D PHONIC window appears on the TV screen.
2
Use 2/3 to select the desired mode.
Each time you press the button, the 3D PHONIC
mode changes as follows:
ACTION
Selected effect mode
• ACTION
Suitable for action movies and sports programs
in which sounds dynamically move.
• DRAMA
Natural and warm sound. You can enjoy movies
in a relaxed mood.
• THEATER
You can enjoy sound effects like in a major
theater in Hollywood.
Available :
STANDBY/ON
TV
DVD
TV2
TV3
2
3
TV5
TV6
5
6
TV8
TV9
8
9
TV0
MUTING
0
+10
TITLE/
TV/VIDEO
GROUP
CANCEL
5/∞/2/3
VOL+
ENTER
NEXT
SELECT
STROBE
SLOW+
AUDIO
VFP
fs/Rate
PROGRESSIVE
SCAN
ZOOM
AMP VOL
ACTION
DRAMA
THEATER
+ 5
4
NONE