JVC XV-FA900BK Manuel D'instructions page 12

Getting started
To connect to a digital audio device
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier, etc. by using an optical or a coaxial digital cable (optional). The digital audio signal from a disc is directly
transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an
optional digital cable, you can enjoy high-quality surround sound.
For digital connection, connect the unit's DIGITAL OUT (OPTICAL or COAXIAL) to the digital input of digital audio device
using an optical or a coaxial digital cable.
The OPTICAL jack is protected by the hinged cover.
To connect the optical cable to the jack, press the cover with the plug and connect it
to the jack inside in the correct direction.
The unit
AUDIO OUT
CENTER
DIGITAL OUT
PCM / STREAM
RIGHT
COAXIAL OPTICAL
FRONT
RIGHT
Note that the DIGITAL OUT jacks on the unit have been designed and equipped exclusively for enjoying the digital
surround sound playback through the unit. It is not recommended to use the jacks for digital dubbing. When recording
the sounds (DVD AUDIO, DVD VIDEO, SVCD, Video CD, or Audio CD) played back on the unit, record them through the
analog jacks (in this case, set "ANALOG OUT" in the "AUDIO" preference display to "2-CH STEREO") (see page 65).
NOTES
• When you connect the unit's DIGITAL OUT to a digital audio device, before using, set "DIGITAL AUDIO OUTPUT" in the
"AUDIO" preference display correctly according to the connected audio device. If "DIGITAL AUDIO OUTPUT" is not set correctly,
loud noise may be generated from speakers, causing damage to them. See "DIGITAL AUDIO OUTPUT" on page 64.
• When you connect the unit's DIGITAL OUT to a Dolby Digital or DTS decoder (or amplifier with a built-in decoder) to enjoy
surround sound, the unit's "D. RANGE COMPRESSION" setting in the "AUDIO" preference display is invalid. Make appropriate
surround audio settings on the decoder.
• If your digital audio device has an AV COMPU LINK terminal, you can use the AV COMPU LINK function. See "AV COMPU LINK
remote control system" on page 75 for details.
10
SUBWOOFER
VIDEO OUT AV COMPU LINK
REAR
VIDEO
LEFT
COMPONENT
Y P B P R
LEFT
S-VIDEO
Coaxial digital cable (not supplied)
Optical digital cable (not supplied)
Audio cable (supplied)
Digital equipment
White
IN IN
LEFT OPTICAL
AUDIO
RIGHT COAXIAL
Red
DIGITAL