Attaching The Covers; Attaching The Gear Lever; Topping Up The Gearbox Oil - Stihl MH 610 Notice D'emploi

English
6.6.2

Attaching the Covers

► Fit cover (1).
► Place cover (2) on the handlebar.
► Screw in screws (3).
16
6.7

Attaching the Gear Lever

► Unscrew nut (1) and remove bolt (2).
► Slide gear lever (3) onto the mount so the bores align.
► Insert bolt (2).
► Screw on nut (1) and tighten.
6.8

Topping Up the Gearbox Oil

The gearbox oil lubricates and cools the tiller gearbox.
NOTICE
The tiller does not contain any gearbox oil on delivery.
Starting the engine with no or too little gearbox oil may
damage the tiller.
► Check the gearbox oil level before starting and if
necessary top up.
► Stop the engine.
► Place the tiller on a level surface.
► Clean the area around the gearbox oil cap with a damp
cloth.
6 Assembling the Cultivator
0478-404-9902-A