Installing The Guard Plate; Installing The Covers; Connecting The Cable - Stihl MH 710 Manuel D'utilisation

7.11 Installing the guard plate

Installing the right guard plate
● Fasten right guard plate (C1) to the
guard plate holders at the front and rear
using bolts (U6), washers (V6) and
nuts (W6).
Installing the left guard plate
● Fasten left guard plate (C2) to the
guard plate holders at the front and rear
using bolt (U6), washers (V6) and
nuts (W6).
22

7.12 Installing the covers

● Fit engine cover (H) onto the machine.
● Position handlebar cover (I) on the
handlebar and fasten using bolts (U4).

7.13 Connecting the cable

● Connect light cable connector (1) to
connector (2).
● Position all cables on the machine
using cable clip (1). Bend the cable clip
so that all cables are tucked away as
neatly as possible.
● Position hose (2) on the machine using
cable clip (3).
0478 404 8805 A - EN