Installing The Drive Control Lever; Installing The Covers; Fastening The Cables To The Handlebar; Gearbox Oil - Stihl MH 610 Manuel D'utilisation

7.11 Installing the drive control lever

● Unscrew nut (1) and bolt (2) at the
control lever mount.
● Fit drive control lever (G) onto the
control lever mount and fasten with
bolt (1) and nut (2).
0478 404 8800 A - EN

7.12 Installing the covers

● Fit engine cover (I) onto the machine.
● Position handlebar cover (J) on the
handlebar and fasten using bolts (Z).
7.13 Fastening the cables to the
handlebar
● Fasten the cables to the handlebar
using cable ties (Q) at regular intervals,
as shown.

7.14 Gearbox oil

Avoid damage to the machine!
Top up gearbox oil before starting
for the first time. Use a suitable
filling aid when topping up the
gearbox oil (e.g. funnel).
21