Making Furrows; After Finishing Work; Transporting; Transporting The Tiller - Stihl MH 610 Notice D'emploi

12 After Finishing Work

► Guide the tiller forwards and regulate the working speed
and working depth using the blade spur.
► Move forwards slowly and in a controlled manner.

11.5 Making Furrows

► Place the front wheel in the operating position.
► Start the engine.
► Guide the tiller forwards and regulate the working speed
and working depth using the blade spur.
► Move forwards slowly and in a controlled manner.
0478-404-9902-A
12 After Finishing Work
12.1 After Finishing Work
► Stop the engine.
► Allow the tiller to cool down.
► If the tiller is wet: allow the tiller to dry.
► Clean the tiller.
► Clean the hoes.

13 Transporting

13.1 Transporting the Tiller

► Switch off the engine.
► Detach retaining pin (1) and remove pin (2).
English
23