EN
1.8
Handling
The machine is delivered in a strong cardboard box secured with strapping tape.
Transport the box using a lift truck with a suitable load capacity. Check the stability and
position of the weight on the forks.
Keep the load as low as possible during movements for greater stability and safety.
Use the supplied wheels to move the pre-separator after it has been put into operation.
It is expressly forbidden to move the unit by lifting it from the ground with the help of lift
trucks or other lifting equipment.
If for any reason it is necessary to lift and transport the preseparator, this work is perfor-
med under the responsibility of the personnel performing it. The load should therefore be
adequately secured in order to perform the work safely
28
28