Publicité
Les langues disponibles
Les langues disponibles
EN
The industrial pre-separator will now increase automatically. Despite this, it is still possible
to operate the actual handle.
Move the industrial pre-separator to the correct position.
If you fi nd that it is more diffi cult to move, remove the side panel, loosen the screws (if ne-
cessary) and apply some lubricating oil or machine grease to the sliding system.
3.2
Working process
Block the pre-separator with the help of the provided locking device.
Take hold of the end of the hose with the selected suction accessory.
Use the provided bracket to move the pre-separator.
38
Publicité
