Publicité
Les langues disponibles
Les langues disponibles
Attention!
The pre-separator can only be moved by hand on level ground! On terrain with a slight
incline, there is a risk that the operator will not be able to hold it due to its considerable
weight. This could result in impact to persons or objects).
Notice!
Avoid rolling up or bending the hose when vacuuming.
3.3
Unlocking and removing the bag
Switch off the suction motors by pressing the respective STOP buttons.
Clamp the part between the bag and the support plate with two clamps (about 3 - 5 cm
between the two).
Separate the bag part between the two clamps.
Remove the pocket with the waste from the support plate.
Put down the new bag and bring it into correspondence of the supporting plate
Attention.
Empty the waste inside the bag into a suitable container for disposal in accordance with
the laws in force in the country where the pre-separator is operated.
EN
39
Publicité
