Subaru H001SAL002 Installation page 3

4
VEHICLE PREPARATION
4. Using a panel removal tool, carefully
remove the driver's left side lower
dashboard panel by pulling straight out.
Unplug all connectors attached to the
dashboard panel. (FIGURE E)
5. Using a 10mm socket/ratchet, remove the
two (2) 10mm bolts securing the metal
knee bolster. (FIGURE F)
6. Remove the steering column shroud.
Using a Phillips screwdriver, remove one
(1) Phillips screw on the left side face
and one (1) Phillips screw on the right
side face of the steering column shroud.
Carefully unsnap and remove the lower
steering column shroud panel and then
remove the upper steering column
shroud panel. (FIGURE G)
NOTE: Rotate the steering wheel to
access the Phillips screws on the face of
the steering column.
PART NUMBER ISSUE
H001SAL002
FIGURE F
DATE
00 24 Jan 2017
FIGURE E
Left Side
FIGURE G
SUBARU OF AMERICA
Right Side
3 OF 19