Subaru H001SAL002 Installation page 11

9
IGNITION HARNESS CONNECTIONS, continued
8-PIN IGNITION SWITCH CONNECTIONS, continued
1. Adjust the tilt/telescoping steering column all the way
out and down.
2. Locate the 8-pin ignition switch connector and the 2-pin
key lock solenoid connector on the right side of the
steering column. Unplug both connectors and carefully
pull the connectors down and away from the steering
column. (FIGURE Y)
3. Using a Phillips screwdriver, remove the two (2) screws
securing the large metal bracket to the left side of the
steering column. (FIGURE Z)
PART NUMBER ISSUE
H001SAL002
DATE
00 24 Jan 2017
8-Pin Ignition
Switch Connector
FIGURE Y
FIGURE Z
SUBARU OF AMERICA
2-Pin Key Lock
Solenoid Connector
11 OF 19