Subaru H001SAL002 Installation page 2

4
VEHICLE PREPARATION
1. Using a 12mm socket/ratchet, disconnect the negative battery terminal. (FIGURE A)
NOTE: Do not disconnect the battery cable from the battery post.
2. Starting at the bottom, use a panel removal tool to carefully remove the left side dashboard panel. (FIGURE B)
Remove one (1) Phillips screw securing the lower dashboard panel on the left side of the dashboard. (FIGURE C)
3. Remove the driver's side under dashboard fi nisher panel by depressing the three (3) pressure clips and pulling downward.
Unplug all connectors attached to the dashboard fi nsher panel. (FIGURE D)
FIGURE A
FIGURE C
PART NUMBER ISSUE
H001SAL002
DATE
00
24 Jan 2017
FIGURE B
FIGURE D
SUBARU OF AMERICA 2 OF 19