Publicité
Les langues disponibles
Les langues disponibles
1. To move forward, lower the lever (fig. 14.D)
until it comes into contact with the grip.
2. Release the lever to stop the forward
movement of the machine.
5.9 STEERING LEVER
The steering lever opens a differential locking
system for an easier steering of the machine.
To turn to the right, press the lever
(fig. 14.H) and simultaneously direct
the machine to the right. The thrust
applied on the machine determines
the right wheel or track to lock,
allowing thus turning to the right.
To turn to the left, press the lever
(fig. 14.I) and simultaneously direct
the machine to the left. The thrust
applied on the machine determines
the left wheel or track to lock,
allowing thus turning to the left.
NOTE Turning without using the
lever may be more difficult.
NOTE Turning without using the lever
may cause the track to be displaced.
5.10
AUGER CONTROL
Operates the auger rotation.
• To operate the auger rotation, lower
the lever (fig. 14.C) until it comes
into contact with the grip.
• If the auger control is operated individually,
upon its release, the auger rotation
stops and the control automatically
returns to the initial position.
If the auger control is operated together with
the forward control, it will remain engaged
upon release. It can be disengaged only by
releasing the forward control as well (fig. 14.D).
5.11
GEAR LEVER
The machine is equipped with a gearbox
operated with a lever (fig. 14.A):
• 6 gears for adjusting the forward speed.
• 2 gears for adjusting the reverse speed.
5.12 CHUTE AND DEFLECTOR GUIDING
(VERSION WITH HANDLE)
The discharge chute rotation is adjusted
using the knob that allows guiding the
snow discharge in the desired direction.
• Turn the knob (fig. 14.E) clockwise /
counter-clockwise to guide the chute.
The deflector is operated downward
or upward using the specific lever (fig.
14.B). Move the lever forward/ backward
to lower / raise the deflector.
• Lever completely forward
= deflector lowered.
• Lever completely backward
= deflector raised.
5.13 CHUTE AND DEFLECTOR
ELECTRICAL GUIDING
(VERSION WITH BUTTONS)
Allows guiding the snow discharge
in the desired direction.
• Press the button (fig. 14.L) forward and
backward to guide the deflector (fig. 1.G).
• Press the button (fig. 14.M) to the right /
left to guide the discharge chute (fig. 1.H).
5.14 HEADLIGHTS AND GRIP HEATING
SWITCHES (OPTIONALS)
To switch on the headlights, move
the switch to position I (fig. 14.F).
• Headlights ON = switch in position I.
To switch on the handle heating, move
the switch to position I (fig. 14.G).
• Heating ON = switch in position I.
5.15
LIFTING PEDAL
Pedal (fig. 16.A) for adjusting the
operating height of the auger:
• Pos. 1 - completely lifted. It is
used to move the machine.
• Pos. 2 - operation. The auger is moved
to the intermediary position. It is used
during normal operating conditions.
• Pos. 3 - in contact with the ground. The
auger is completely lowered and in contact
EN - 8
Publicité
