Interfaces And Functions - SMA SUNNY TRIPOWER 12000TL-US Instructions D'installation

Masquer les pouces Voir aussi pour SUNNY TRIPOWER 12000TL-US:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SMA Solar Technology America LLC
4.2

Interfaces and Functions

The inverter can be equipped or retrofitted with the following interfaces and functions:
SMA Speedwire/Webconnect
The inverter is equipped with SMA Speedwire/Webconnect as standard. SMA Speedwire/
Webconnect is a type of communication based on the Ethernet standard. This enables inverter-
optimized 10/100 Mbit data transmission between Speedwire devices in PV systems and the
software Sunny Explorer. The Webconnect function enables direct data transmission between the
inverters of a small-scale system and the Internet portal Sunny Portal without any additional
communication device and for a maximum of 4 inverters per Sunny Portal system. In large-scale PV
power plants, data transmission to the Internet portal Sunny Portal is carried out via the
SMA Cluster Controller. You can access your Sunny Portal system from any computer with an
Internet connection.
Class 1 wiring methods are to be used for field wiring connection to the terminals of the
communication interface.
Installation Manual
The product does not have a transformer.
Equipment Grounding Terminal
This symbol indicates the position for the connection of an equipment
grounding conductor.
Risk of burns due to hot surfaces
The product can get hot during operation. Avoid contact during opera-
tion. Prior to performing any work on the product, allow the product to
cool down sufficiently.
Danger to life due to electric shock
The product operates at high voltages. Prior to performing any work on
the product, disconnect the product from voltage sources. All work on the
product must be carried out by qualified persons only.
Observe the documentation
Observe all documentation supplied with the product.
FCC designation
The product complies with the requirements of the applicable FCC stan-
dards.
UL 1741 is the standard applied by Underwriters Laboratories to the
product to certify that it meets the requirements of the National Electrical
®
Code
, the Canadian Electrical Code
4 Product Overview
®
CSA C22.1 and the IEEE 1547.
STPTL-US-10-IA-xx-22
17

Publicité

Table des Matières
loading

Table des Matières