Troubleshooting - Angelcare AC315 Manuel De L'utilisateur

TROUBLESHOOTING

TAKING CARE OF YOUR RECHARGEABLE BATTERY
• Ensure that you fully charge your battery for 9 hours before its first use.
• To maintain maximum battery life it is recommended that you fully discharge your battery periodically.
If your Parent Unit is not in use, please turn it OFF.
LOSS OF CONNECTIVITY
• If your Camera becomes un-paired from your Parent Unit, please follow the steps below to re-pair them.
68°F
68°F
6
3
NO SOUND IS BEING TRANSMITTED
• Check the volume level on the Parent Unit and the Camera to ensure they are set to an appropriate level.
• Try bringing the Parent Unit closer to the Camera to see if you get sound.
• Charge the Parent Unit.
WEAK RECEPTION
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby's reach.
• Recharge the Parent Unit.
STATIC, DISTORTION, INTERFERENCES
(FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC.)
• Rotate Parent Unit or move it away from source of interference.
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)
• Move units farther apart (at least 10 foot [3 meters]).
• Decrease volume on Parent Unit.
THE PARENT UNIT SCREEN IS BLACK (PARENT UNIT IS OFF)
Turn the Parent Unit back ON by pushing and holding the POWER ON/OFF button for 2 seconds.
•
• Recharge the Parent Unit.
1) Select the pairing settings menu and then
2) Press the down arrow
CAMERA (the Edit icon will turn to blue). Press
paired camera as the Trash icon
to confirm. The icon will appear, then Press
camera.
The Parent Unit Power Indicator will flash to indicate it's
in linking mode.
3) Plug in and turn your Camera ON.
4) Press and hold the Pause/Pairing button on the top right of the
Camera for 2-3 seconds.
5) When the Trash can icon
to access it.
once and press to select/highlight
to delete the
appears, and then Press
to re-pair the
shows up, the Camera is now paired.
E
N
19