Positioning The Movement Sensor Pad - Angelcare AC315 Manuel De L'utilisateur

PARENT UNIT:
Power indicator
Power On/Off
Main Menu
Microphone
Navigate back
Front Side
WARNINGS
Children have STRANGLED in cords.
• KEEP the Camera Unit and adapter cords out of the reach of children
more than 3 feet or 1 meter away.
• NEVER attempt to use the Sensor Pad(s) cord without the protective
cord covers supplied.
• CHECK protective cord covering before each use:
-Ensure there is no slack in cords and exposure of cord to child is minimised (see further
instructions within).
-Immediately discontinue use of Sensor Pad(s) if protective covering is damaged or broken.
• NEVER use extension cords with adaptors. ONLY use adaptors provided.
• This product is NOT a Toy. NEVER allow children to play with it.
STEP 2 - POSITIONING THE MOVEMENT SENSOR PAD
2.1 - SELECT A LOCATION FOR THE CAMERA
Camera can be installed on the wall (see included parts) or using the tabletop stand. Depending on the position
you choose, you'll need to remove the metal ball from the stand to wall mount Camera.
IMPORTANT
Place the crib near a supporting wall and far from air currents. Install the Camera on a flat, stable surface
facing the crib at a distance of at least 3 feet (1 meter). Make sure to plug the adapter to the socket outlet
nearest to the equipment and that is easily accessible.
AC410/AC417
PU
08/04/2016
Volume control +/-
(on the side)
Visual sound indicator
Microphone
+
VOLUME
-
Navigate Down
Confirm Selection
Navigate Up
- Strangulation Hazard –
Rechargeable battery
compartment
Micro USB charging
port (on the side)
Rear Side
Folding stand
(on rear)
E
N
5