socomec DIRIS Am Notice D'utilisation page 46

15 PROGRAMMING COMMUNICATION PARITY (COM PAR)
NB: As a default setting, the communication is without parity (PAR NO). If you want this setting, press
to communication stop bit programming (COM STOP). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press once
Press once
Press once
16 PROGRAMMING COMMUNICATION STOP BIT (COM STOP)
NB: The stop bit default setting is 1 (STOP 1). If you want this value, press
gramming (NETWORK) . If not, proceed as follows:
KEYS INSTRUCTION
Press once
or
Press once
Press once
SOCOMEC - Ref. : 875 508A
DISPLAY
or
. You will return to network type pro-
DISPLAY
(OPTION)
. You will pass
COMMENT
No parity
Press again for: EVEN
(even parity) and NO
(without parity)
Press again for: ODD
(odd parity) and NO
(without parity)
Confirm parity.
Press on to pass to
stop bit programming
(STOP)
(OPTION)
COMMENT
to display flashing stop
bit value
1 for 1 bit and 2 for 2 bits
Confirm stop bit.
Press on to return
to network type
programming.
47