socomec DIRIS Am Notice D'utilisation page 38

Press once
3 PROGRAMMING THE CURRENT TRANSFORMER RATIO (CT)
NB: The default CT setting is 500/5. If you want this setting, press
(VT). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press to decrement or
Press once to confirm value
Press once to pass to VT programming
NB: the first 5 digits correspond to the transformer primary value (1 to 10000), and the last digit to the transformer
secondary value (1 or 5 A).
Example : Programming 1500/5 once in the CT menu.
KEYS INSTRUCTION
Press twice
Press once
Press once
SOCOMEC - Ref. : 875 508A SOCOMEC - Ref. : 875 508A
to increment selected digit value
. You will pass to the voltage transformer line
DISPLAY
DISPLAY
Confirm type.
Press on to pass
to CT programming.
COMMENT
Press as many times as
necessary to move to
the right, or press
to move to the left.
COMMENT
To display flashing
the 2nd digit
To increment
the 2nd digit
To confirm the ratio
Press on to pass to
VT programming.
39 39