socomec DIRIS Am Notice D'utilisation page 40

Press once
Press once
Press once
7 PROGRAMMING POWER INTEGRATION TIME (TIME P/Q/S)
NB: The time default setting is 15 minutes (P/Q/S 15). If you want this value, press
zero programming line (RSET). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press once
Press once
Press once
SOCOMEC - Ref. : 875 508A
or
. You will pass to the reset to
DISPLAY
or
Press again for:
30, 60, 5, 8, 10
and 15 minutes
Press again for:
8, 5, 60, 30, 20
and 15 minutes
Confirm time.
Press on to pass
to power integration
time programming
(TIME P/Q/S)
COMMENT
to display flashing
15 minutes
Press again for:
30, 60, 5, 8, 10
and 15 minutes
Press again for:
8, 5, 60, 30, 20
and 15 minutes
Confirm time.
Press on to pass
to reset to zero
programming (RSET)
41