socomec DIRIS Am Notice D'utilisation page 45

13 PROGRAMMING THE COMMUNICATION ADDRESS (COM ADR)
NB: The address default setting is 5 (ARD 5). If you want this value, press
programming (COM BdS) . If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press to decrement or
Press once to confirm
Press once to pass to speed programming (COM BdS)
NB: the address can vary between 1 to 255.
PROGRAMMING COMMUNICATION SPEED (COM BDS)
14
NB: The speed default setting is 9600 BdS (BDS 9600). If you want this value, press
tion parity programming (COM PAR). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press once
Press once
Press once
46
to increment the selected digit value
. You will pass to communication speed
DISPLAY
DISPLAY
or
(OPTION)
COMMENT
to display flashing
1st digit (press twice and
three times for the 2nd
and 3rd digit), or press
to return to the left.
(OPTION)
. You will pass to communica-
COMMENT
to display flashing 9600
bauds
Press again for:
38400,2400,4800 and
9600 bauds
Press again for:
2400,38400,19200 and
9600 bauds
Confirm speed.
Press on to pass to
parity programming
(PAR).
SOCOMEC - Ref. : 875 508A