Before Operation - Sharp R-68ST-A Mode D'emploi

BEFORE OPERATION

Your oven comes pre-set for Energy Save Mode.
This facility saves electricity when the oven is not
in use.
When you first plug it in nothing will appear in the
digital display.
To operate the oven in Energy Save Mode:
1. Plug in the oven. Nothing will appear in the display
at this time.
2. Open and close the door. The oven display will
show ". 0".
3. Heat the oven without food (See page GB-7,
NOTE b).
In Energy Save Mode, if you do not operate the oven for 3 minutes or more (i.e. closing the door, pressing the
STOP key, or at the end of cooking), you will not be able to operate the oven until you open and close the oven
door.
R-68ST-A [06_01 EN].indd 4 R-68ST-A [06_01 EN].indd 4
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
GB-4
7/14/09 10:10:18 AM 7/14/09 10:10:18 AM