Assembly Of Refractory Brick - Palazzetti Ecomonoblocco MX 25:9F Notice D'installation Et D'entretien

8.3 Assembly of refractory brick

1) Place the right (3) and middle (4) refractory
backs on the wall of the Ecomonoblocco and
gently slide them into position, centring the
guide (c) behind the cast iron base (Fig. 21).
C
2) Secure the refractory elements using the
slotted bracket (D) in the support (b) (Fig. 22).
3) Place the left refractory back (5) against the
wall of the Ecomonoblocco and gently slide
it into position, centring the guide (c) in the
cast iron base (Fig. 23).
4) Secure the refractory using the bracket (D) in
the support (b).
54
3 4
Fig. 21
D
B
Fig. 22
B D
5) Place the refractory side panels (6) inside the
combustion chamber and gently slide them
into place, centring the guide (E) on the sides
of the cast iron base (Fig. 24).
6) Attach the securing brackets (D) that align
the side walls with the back walls.
5
C
Fig. 23
D
E
6
Fig. 24
004778930 - 06/12/2021