After Pumping - Medela Freestyle Flex Mode D'emploi

Operating your breast pump (cont.)
Pausing
32
In both stimulation and expression phase the breast pump can be paused.
This allows you to readjust yourself or your breast pump set, or attend to your surroundings.
1. For pausing, press the Start/Pause button
Æ The pumping operation stops and the Start/Pause button and the time display are
flashing.
2. To resume pumping, press the Start/Pause button
If you want to start a completely new pump session, switch the breast pump off and on again
by pressing the On/Off button
• If pumping is not resumed within two minutes, the breast pump switch off automatically.
• To resume pumping, you will need to start a new session.
• If you need to pause for more than two minutes, we recommend restarting with stimulation
phase.
• Do not forget to record milk output in MyMedela.

After pumping

twice.
i
Information
Prepare the milk for storage as follows:
1. Use the bottle stand to prevent the bottle from tipping
over.
2. Close the bottle with a lid.
For information on storing the milk follow the instructions in
chapter 11.
while the breast pump is running.
again.