Pausing; Turning Off; After Pumping - Medela Swing Maxi Mode D'emploi

Operating the breast pump (cont.)

7.4 Pausing

26
In both stimulation and expression phases the breast pump can be paused.
This allows you to readjust yourself or your breast pump set, or attend to your surroundings.
1. For pausing, press the On/Pause/Off button
Æ The pumping operation stops and the status light is pulsing.
2. To resume pumping, press the On/Pause/Off button
i
• If pumping is not resumed within two minutes, the breast pump turns off automatically.
• If you need to pause for more than two minutes, restart with stimulation phase.

7.5 Turning off

To turn the breast pump off press and hold the On/Pause/Off button for two seconds.

7.6 After pumping

101043399-2021-04-A-swing-maxi-MedelaFamily-MD-ifu-ENUS-FRCA-ESMX.indb 26 101043399-2021-04-A-swing-maxi-MedelaFamily-MD-ifu-ENUS-FRCA-ESMX.indb 26
Information
Prepare the milk for storage as follows:
1. Use the bottle stand to prevent the bottle from tipping
over.
2. Remove the bottle from the connector.
3. Close the bottle with a lid.
4. Remove the tubing from the connector lid and the pump
unit.
5. Store the tubing in a clean bag/container. Do not wrap
the tubing around the pump unit.
For information on storing the milk follow the instructions in
chapter 10.
while the breast pump is running.
again.
05/07/2021 12:15:32 05/07/2021 12:15:32