Front Pto; Hydraulic Lift Operation - GOLDONI 3000STAR Serie Emploi Et Entretien

4.7.1 FRONT PTO.

(Optional)
The front PTO is engaged with knob n.11 fig.2 (fig.31):
• Set the engine between 1200 and 1800 Rpm.
• Push knob n.1 fig. 31 down and turn it to "ON". Indicator light n. 8 Fig.3 will begin
to flash and then stay on
Press knob n.1 fig. 31 to disengage the PTO.
Spline: 1" 3/8 ASAE with six splines
Speed: 1000 Rpm with the engine at 2350 Rpm
Turning direction: counter-clockwise.

4.8 HYDRAULIC LIFT OPERATION

The following work statuses can be used:
Position control
Draft control
Floating operation
Intermix
Position control
Use for tasks that require constant implement position (drilling, dozing, manure
spreading, etc.).
• Move lever n.8 fig.1 all the way back.
• Use lever n.9 fig.1, to raise or lower the lift. Lift is proportional to lever action.
Draft control
Use to automatically maintain constant traction by lift on tractor with implements
mounted (ploughs, rotary tillers etc.).
• Move lever n.9 fig.1 all the way back.
• Use lever n.8 fig.1 to raise or lower lift.
Floating operation
Use when implements rest on ground and follow ground contours (tillers, ridgers,
dozers, etc.).
• Move lever n.8 fig.1 all the way back
• Use lever n.9 fig.1 to raise or lower the lift.
Intermix
Use when the implement must not lift beyond a certain set height.
• Raise the lift with lever n.9 fig.1 to reach the height to be set.
• Raise or lower the lift with lever n.8 fig.1.
64