Wheels/synchronised power take-off ratio:
• With power take-off at 750 rpm, ratio: 1/6.06 rpm
• With power take-off at 1000 rpm, ratio: 1/10,16 rpm, direction of rotation,
clockwise when using forward gears.
The indicator light (N° 6 fig.2) indicates that the power take-off is
disengaged. Stay in this position only for the time that is absolutely
necessary.
4.7.1 Front power take-off.
(Available on request)
The front power take-off is engaged with knob (N°4 fig.1) (fig.27):
• Bring the engine to a speed to between 1200 - 1800 rpm.
• Push and turn knob (N° 1 fig. 27) to the "on" position. The indicator light (N°
29 fig.1) will start flashing, then stay on.
To disengage the front power take-off push knob (N°1 fig.27).
Profile: 1" 3/8 ASAE with 6 splines
Speed: 1000 rpm with an engine speed of 2350 rpm
Direction of rotation: anticlockwise
4.8 FRONT DRIVE
It is necessary to use the front drive in conditions in which the tractor requires
more traction, or on particularly uneven ground.
The front drive is engaged with button (N° 9 fig.1) (on-off).
The indicator light (N° 5 fig.2) comes on to show that the front-wheel drive is
engaged.
Do not engage the front-wheel drive with the tractor in draft mode or if the rear
wheels are slipping.
To limit tyre wear, avoid using the front-wheel drive indiscriminately.
4.9 POWER LIFT
The following conditions of use can be obtained:
Position control
Draft control
Floating mode
Mixed mode
Position control
Suitable for work which requires a constant position of the implement (drills,
scrapers, mounted manure spreaders etc.).
• Move lever (N° 13 fig.1) back to the end of its travel.
• With lever (N° 14 fig.1), raise and lower the lift. The degree of lift is
proportional to the action of the lever.
76