Tractor Noise Information Chart - GOLDONI 3000STAR Serie Emploi Et Entretien

20. Avoid tight steering angles when towed implements are mounted and the drive
shaft is under strain since the coupling could be damaged.
21. Do not use the 3-point linkage on the lift as a hitch.
22. Regulate the hitch in its lowest possible positions to prevent the machine from
rearing.
23. During transhipments with equipment coupled on the 3-point linkage, tension the
chains and keep the lift raised.
24. The operator must check if every part of the tractor and, especially the safety
devices, are in good working condition and perform to specs. They should be
kept in perform working condition. If you note any defects or malfunctioning, fix or
repair them in good time. If necessary contact your nearest Goldoni Assistance
Centre. Failure to observe these instructions will release the manufacturer from all
liability.

1.1 TRACTOR NOISE INFORMATION CHART

This Chart, which provides the noise values produced by the tractors described in the
Guide to Maintenance and Use, has been prepared in order to satisfy the
requirements of Law Decree No. 277 dated 15/08/1991.
Bearing in mind the impossibility of the manufacturer to foresee the normal working
conditions in which the agricultural tractor will be operated, the noise levels have
been defined in accordance with the methods and conditions described in
Attachment 8 of Presidential Decree No. 212 dated 10/02/1981. This conforms to
Directive 77/311/CEE concerning noise levels at the ears of the driver of wheeled
agricultural tractors.
56