Pto; Front Pto - GOLDONI QUASAR Série Utilisation Et Entretien

4.7 PTO

See fig. 1
Disengage the clutch by pulling on lever (2, fig. 1).
Engage the PTO with lever (8, fig. 1) in the SYNCHRONISED position with
tractor driving speed or Independent, at 540-750 Rpm (540-1000 Rpm on
request).
Engage the PTO at 540 or 750/1000 Rpm by lever 9, fig. 1.
Engage the clutch by releasing lever (2, fig. 1).
Profile 1"3/8 ASAE with 6 splines
Selection (lever 9, fig. 1)
540
750
1000
Clockwise rotation.
Indicator light (6, fig. 3) signals PTO clutch disengagement. Hold it in this
position only for amount of time strictly necessary.

4.7.1 FRONT PTO

(Optional)
The PTO is engaged with switch (1, fig. 2) (see fig. 29):
• Accelerate the engine to 1200 - 1800 Rpm.
• Turn and hold in "on" position the switch fig. 29 (movement 1 and 2). Indicator
light (6, fig. 3) should go on, first blinking, then continuously.
Disengage the front PTO by pressing switch fig. 29.
The switch will automatically return to position "off" (movement 3).
Spline: 1" 3/8 ASAE with 6 splines
Speed: 1000 Rpm with engine at 2350 Rpm
Rotation direction: anti-clockwise (viewing the power take-off from in front of the
machine).
PTO SPEED
PTO Rpm
540
750
540
1000
70
Engine Rpm
2430
2603
1874
2069