Getting Ready To Sew Connecting The Machine To Power Supply; Before Using Your Sewing Machine; For Your Safety; Controlling Sewing Speed - Alfa compakt 100 Manuel D'instructions

t
r
e
q
w
GETTING READY TO SEW
Connecting the Machine to Power Supply
CAUTION:
Before connecting the power cord, make sure the
voltage and frequency shown on the machine
conform to your electrical power.
1. Turn the power switch off.
2. Insert the machine plug into the machine socket.
3. Insert the power supply plug into the wall outlet.
4. Turn the power switch on.
q Power switch
w Machine plug
e Machine socket
r Power supply plug
t Wall outlet

Before Using Your Sewing Machine

Before using your sewing machine for the first time,
place a waste fabric under the presser foot and run
the machine with thread for a few minutes. Wipe
away any oil which may appear.

For your safety

* While in operation, always keep your eyes on the
sewing area. Do not touch any moving parts, such
as the thread take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from
the power supply:
- When leaving the machine unattended
- When attaching or removing any parts
- When cleaning the machine
* Do not place anything on the foot control, when not
sewing.

Controlling Sewing Speed

Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster
the machine runs.
6