Table des Matières
Publicité
q
Cleaning the Feed Dog
Turn off the power switch and unplug the
machine before cleaning the feed dog.
Remove the needle and the presser foot.
Remove the needle plate setscrews and the
needle plate.
With a brush, clean out any dust and lint
clogging the feed dog teeth.
Reset the needle plate.
Sewing Light
The bulb may be HOT. Protect your fingers when
handling it.
The sewing light is located behind the face plate.
To change the bulb, take the face plate off the sewing
machine by removing the cap and the setscrew.
q
w
To remove .... Push and twist to the left.
To replace .... Push and twist to the right.
42
CAUTION:
q Setscrew
WARNING:
q Cap
w Setscrew
Publicité
Table des Matières
