Additional Use And Accessories - KLS Martin group 80-070-00-04 Mode D'emploi

EN
4.1

Additional Use and Accessories

Basket
A storage basket (item no. 08-168-00-20) can be optionally fitted to the rear wall of the Cart
using two screws. This provides an additional storage option for your accessories.
NOTICE
The rear wall features altogether four threaded holes, but only the two upper holes are used
for mounting the basket. As a result, the basket hangs on the Cart.
Castors with locking devices
To have the roll-away protection feature available on all castors of your Cart, you can replace
the two non-lockable castors with lockable castors (item no. 08-156-00-11). This is done
easily: just remove the existing castors and screw the lockable ones in place instead.
Argon gas cylinder holder
Figure 3: Holder for argon gas cylinder
1 Holder
2 Protective mat
A holder for 5-liter argon gas cylinders (1) (item no. 80-070-01-04) can be fitted to one of the
profiled aluminum columns. The holder is available complete with protective mat (2) and the
required screws.
24
Instructions for Use
HF Cart Item No. 80-070-00-04
Revision 1