Installation Of The Access Steps; Assembling And Installing The Chamber System - Kessel LW 400 Mode D'emploi

3.10

Installation of the access steps

Arrange the access steps <11> above one another, insert into the guide rail provided from above and fix in place
using safety wedges (see Fig. [8]).
The access steps can only be used with the Comfort chamber system LW 800 and LW 1000.
3.11

Assembling and installing the chamber system

Note the two different sealing gasket diameters.
• Place the sealing gasket <32> onto the seat groove of the base
element.
• Use a rubber hammer to knock the sealing gasket into the seat
groove at four equi-distant points <A B C D> around the edge.
• Hammer the sealing gasket completely into the seat groove. Make
sure that sealing gasket is neither bulged nor
stretched during the process.
010-657
Installation
Fig. [16]
40 /96
Fig. [17]
2017/11