Type Plate; Scope Of Delivery - Kessel Aqualift F XL Manuel D'instructions Et D'utilisation

Assemblies
(A) System tank (normal installation depth)
(B) System tank (low installation depth)
(1)
(2)
(3) System tank (base section/technical module)
(4) Level measurement (pressure sensor)
(5)
(6)
(7) Connection for ventilation pipe
(8) Pressure pipe
(9) Backflow preventer with shut-off valve
2.5

Type plate

(1) Name of the system
(2) Article number
(3) Connection voltage and connection fre-
quency, current consumption range
(4) Maximum delivery rate / pumping height
(5) Operating mode + protection rating (IP)
(6) Serial number
(7) Hardware revision status
(8)
2.6

Scope of delivery

(1) System tank (base section/technical module)
(2)
(3) Operating and maintenance instructions
(4) Connection diagram, in the control unit housing cover
(5) Control unit with separate installation instructions
(6) Fastening material for the control unit
(-) Engineering chamber, comprising different elements
with separate installation instructions (not in figure)
(-) 2 pcs. 45°-elbows DN 150 with seal
for pipe penetration (not in figure)
20 / 88
Control unit
Pump(s)
Type plate
Inlet
QR code
Pump(s)
Pumping station / Installation and operating instructions 010-695_02