Assembly (Optional Shortening) Of The Upper Section - Kessel LW 400 Mode D'emploi

Fix the chamber parts using connection wedges and assemble as follows:
• Use pliers to press both connecting surfaces together.
• Hammer the connecting wedges <7> in place and release the pliers
again.
• Then insert the sealing gasket for the next element and proceed as
described above.
3.12

Assembly (optional shortening) of the upper section:

• Insert the sealing gasket <22> or <4> into the cone <34> and grease it.
• Insert the upper cover section <20> or <2>, move it roughly to the required installation height, fix in place
using clamping rings.
• Use the adjustment screws to carry out fine adjustment to the final height.
LW 400
010-657
Fig. [21]
Installation
LW 800/1000
42 /96
Fig. [20]
Fig. [22]
2017/11