Motion Setup; Set Md Area; Set Md Sensitivity - Abus TV8500 Guide De L'utilisateur

7.3 Motion setup

7.3.1 SET MD AREA

The motion detection area is split up into 16 x 12 cells. Cells which are marked to detect
motion are displayed red.
In order to navigate use the
Press the playback
Editing modes:
CELL EDIT
DEL BLOCK
DEL ALL
ADD BLOCK
ADD ALL

7.3.1 SET MD SENSITIVITY

Here you can set the sensitivity of motion detection.
MD ENERGY
MD THRESHOLD
MD AREA
MODE CELL EDIT
MODE CHANGE : PLAY
button in order to change the editing mode.
Here you can (de-) activate every single cell.
Here you can deactivate a complete block of cells.
Here you can deactivate all cells at once.
Here you can activate a complete block of cells.
Here you can activate all cells at once.
Shows the current recognized motion.
By pressing the buttons
motion detection is triggered. The lower the value is set the more
sensitive motion detection reacts.
buttons and confirm by pressing the
or you can set the value when
33
button.